企业信息

    济宁市天通机械设备有限公司

  • 9
  • 公司认证: 营业执照已认证
  • 企业性质:有限责任公司
    成立时间:
  • 公司地址: 山东省 济宁 任城区 唐口街道 唐口工业园
  • 姓名: 范先生
  • 认证: 手机已认证 身份证已认证 微信未绑定

    供应分类

    湖北 废水处理设备 养殖厂污水处理 电解式 价格

  • 所属行业:环保 水处理设备 污水处理成套设备
  • 发布日期:2017-12-29
  • 阅读量:315
  • 价格:面议
  • 产品规格:定制
  • 产品数量:1500.00 台
  • 包装说明:定制
  • 发货地址:山东济宁任城区唐口街道  
  • 关键词:废水处理设施,污水处理站,水处理设备

    湖北 废水处理设备 养殖厂污水处理 电解式 价格详细内容

    公司简介:济宁天通机械有限公司主要产品有:废水处理站,废水处理工艺,废水处理设备,工业污水处理设备、水处理设备、污水处理设备、环保废水处理设备等。公司始终坚持诚实守信的原则,帮助客户解决问题,并在水处理行业中赢得了良好的声誉。济宁天通水处理设备有限公司愿与您在诚信、合作、共赢的基础上发展。公司拥有先进的生产设备和经验丰富的技术人员。产品设计新颖、准确、耐用,深受用户**。良好的产品质量和良好的跟踪服务,与客户建立长期稳定的合作关系。
    竖流式沉淀塔
    
    设备简介:
      竖流式沉淀池又称立式沉淀池,是池中废水竖向流动的沉淀池。池体平面图形为圆形或方形,水由设在池中心的进水管自上而下进入池内(管中流速应小于30mm/s),管下设伞形挡板使废水在池中均匀分布后沿整个过水断面缓慢上升(对于生活污水一般为0.5-0.7mm/s,沉淀时间采用1-1.5h),悬浮物沉降进入池底锥形沉泥斗中,澄清水从池四周沿周边溢流堰流出。堰前设挡板及浮渣槽以截留浮渣保证出水水质。池的一边靠池壁设排泥管(直径大于200mm)靠静水压将泥定期排出。竖流式沉淀池的优点是占地面积小,排泥容易,常用于处理水量小于20000m3/d的污水处理厂。
    
      本公司生产的污水处理设备现已广泛应用于国内外的工业、生活小区、食品、医疗、屠宰、骨胶、明胶、化工、皮革、纺织、酒店、印染、造纸等各行业的污水治理病轻松达标排放或回用。
    理论依据:
      竖流式沉淀池中,水流方向与颗粒沉淀方向相反,其截留速度与水流上升速度相等,上升速度等于沉降速度的颗粒将悬浮在混合液中形成一层悬浮层,对上升的颗粒进行拦截和过滤。因而竖流式沉淀池的效率比平流式沉淀池要高。
    Company profile: Jining Tiantong Machinery Co., Ltd. main products are: wastewater treatment station, waste water treatment process, wastewater treatment equipment, industrial *age treatment equipment, water treatment equipment, *age treatment equipment, environmental protection wastewater treatment equipment and so on. The company always adhered to the principle of honesty and trustworthiness, helped the customers to solve the problem and won a good reputation in the water treatment industry. Jining Tian Tong Shui processing equipment Co., Ltd. is willing to develop on the basis of good faith, cooperation and win-win. The company has advanced production equipment and experienced technicians. The product design is novel, accurate and durable, and is well received by the users. Good product quality and good tracking service, and establish long-term and stable cooperation with customers.
    Vertical flow precipitating tower
    
    Introduction of equipment:
    Vertical flow sedimentation tank, also known as vertical sedimentation tank, is a sedimentation tank for vertical flow of wastewater in the pool. The tank body plane is round or square, located in the center of the pool water from the water inlet pipe from top to bottom in the pool (tube flow rate should be less than 30mm/s), the waste water is evenly distributed in the pool slowly along the entire cross section of the riser under the umbrella plate (for *age is generally 0.5-0.7mm/s, precipitation time, suspended by 1-1.5H) the settlement into the bottom mud cone bucket, water from the pool around along the perimeter of the overflow weir outflow. There are baffles and scum slots in front of the weir to intercept the scum to ensure the water quality. On the side of the pool, the mud pipe is laid on the wall of the pool (the diameter is greater than 200mm) and the mud is discharged regularly by the static water pressure. The vertical flow sedimentation tank has the advantages of small area and easy sludge discharge. It is often used to treat a *age treatment plant with less than 20000m3/d of water.
    
    The company's *age treatment equipment has been widely applied in domestic and foreign industrial, residential areas, food, medical treatment, slaughtering, bone glue, gelatin, chemical industry, leather, textile, hotel, printing and dyeing, papermaking and other industries of *age treatment disease, easy to discharge or reuse.
    Theoretical basis:
    In vertical sedimentation tank, the direction of flow is opposite to the direction of particle precipitation, and its interception speed is equal to the rising velocity of water flow. Particles with ascending velocity equal to settling velocity will suspend in mixed liquid to form a suspended layer, and intercept and filter up the rising particles. Therefore, the efficiency of the vertical flow sedimentation tank is higher than that of the advection sedimentation tank.

    http://jnttjx01.cn.b2b168.com
    欢迎来到济宁市天通机械设备有限公司网站, 具体地址是山东省济宁任城区唐口工业园,老板是尹宜良。 主要经营济宁 天通,是国内成员之一的机械设备加工生产研发厂家,其核心技术以:智能自动化小型压路机、数控钢筋笼滚焊机、公路拌合机机械设备为主。 济宁 天通,始终坚持以“先做人,后做事”为核心价值观,以“儒商文化”为品牌文化,以“做今日品牌,创**企业”为宗旨,以“实用为本、德行天下”为理念,铸造中国机械行业的**品牌。公司依托与国外的分支机构、国内的办事处、及专业的施工队伍,凭借行业内设备研发*团队的强大创。 单位注册资金单位注册资金人民币 100 - 250 万元。 我司专营小型压路机,灰土拌和机,拖拽式小宝马拌和机,手扶压路机,钢筋笼滚焊机,研发团队成员,均来自国内外大型工程机械企业的研发机构的专业技术人员。经过多年的实践与积累,掌握了多种工程机械产品从设计到生产加工的全套技术。