企业信息

    济宁市天通机械设备有限公司

  • 8
  • 公司认证: 营业执照已认证
  • 企业性质:有限责任公司
    成立时间:
  • 公司地址: 山东省 济宁 任城区 唐口街道 唐口工业园
  • 姓名: 范先生
  • 认证: 手机已认证 身份证已认证 微信未绑定

    供应分类

    天通 污水处理设施 造纸污水处理 电解式 品质**

  • 所属行业:水工业 污水处理设备 污水处理成套设备
  • 发布日期:2019-05-15
  • 阅读量:205
  • 价格:面议
  • 产品规格:定制
  • 产品数量:1500.00 台
  • 包装说明:定制
  • 发货地址:山东济宁任城区唐口街道  
  • 关键词:污水处理设施,造纸污水处理,水处理设备

    天通 污水处理设施 造纸污水处理 电解式 品质**详细内容

     公司简介:  
     济宁天通水处理设备有限公司位于美丽的山东济宁,公司是一家集研发、生产、销售水处理设备、环保净化设备于一体的综合生产型企业。主要经营的产品以:废水处理站、废水处理工艺、废水处理设备、工业废水处理设备、水处理设备、生活废水处理设备、环境废水处理设备等设备为主。所生产设备在销往全国各地的同时也出口多个国家并得到客户的一致**!
    一、造纸污水处理设备介绍
    造纸污水水质的特点:SS、COD均较高在COD的组成中,非溶解性COD较高,约占60%以上,溶解性COD较低。而溶解性COD又较难生物降解。虽然没有黑液的产生,但仍存在污染物浓度高、可生化性较差的特点。济宁天通研发生产的一体化污水处理设备采用国际先进生物处理工艺,该工艺的去除效率较高,去色效果好,具有技术性能稳定可靠,处理效果好,投资省,占地少,维护方便等优点,同时我公司也可根据客户要求同时配套中水回用设备。
    二、造纸污水处理设备的优点
    1、一体化污水处理设备经碳钢防腐处理或不锈钢构件,现场拼接组合而成。重量轻巧,易于运输,方便安装;
    2、采用玻璃钢、碳钢、不锈钢防腐结构,具有耐腐蚀、抗老化等优良特性,使用寿命长达30 年以上;
    3、放置于地表以下,设备上面的地表可作为绿化或其他用地,不需要建房及采暖、保温。较大限度的实现了系统的集成,减少占地面积;
    4、无污染,无噪声,无异味,减少二次污染;
    5、不受污水量的限制,机动灵活,可单个使用,也可多个联合使用。
    6、整个设备处理系统配有全自动电气控制系统和设备故障报警系统,运行安全可靠,平时一般不需要专人管理,只需适时地对设备进行维护和保养,管理费用小。
    7、较大的特点是可以将污水处理工程布置成景观。一体化设备埋于地下不但出水效果好,而且地表绿化率可达90%以上,若使用耐寒喜水的特殊标志性树种或草坪,形成溪流、喷泉、水塘、鱼池融为一体的水处理景观,化污浊为清泉,既治理了污水又美化了环境,满足人们依山傍水而居的愿望。
    三、造纸污水处理设备的基础安装、使用、维护
    1、基础:设备如放置在地坪以上,只需准备一块与设备外形相同的混凝土地坪作为基础。基础承压必须大于4T/m2,也同时要求水平、平整。如设备埋于地坪以下,基础标高必须小于或等于设备标高并保证下雨不积水,基础一般是素混凝土(是否配筋视当地地质情况而定)。
    2、安装:根据安装图就位,箱体的位置、方向不能放错,然后与进水管道连接。使用前在设备内注入清水,检查各管道有无渗漏,若无则箱体四周覆土,直至设备检查孔,并平整地面。把电控箱控制线与水泵接通,电控箱与电源接通,接线时注意风机、电机的转向,必须与风机所指方向相同。
    Company introduction:
    Jining Tian Tong water treatment equipment Co., Ltd. is located in the beautiful Jining, Shandong. The company is a comprehensive production enterprise integrating R & D, production, sales of water treatment equipment, environmental protection and purification equipment. The main products are: wastewater treatment station, waste water treatment process, waste water treatment equipment, industrial wastewater treatment equipment, water treatment equipment, domestic wastewater treatment equipment, environmental wastewater treatment equipment and other equipment. The production equipment is exported to all parts of the country, but also export a number of countries and get customers' consistent praise!
    Introduction of papermaking sewage treatment equipment
    The characteristics of papermaking sewage water quality: SS and COD are higher in the composition of COD, the non solubility COD is higher, accounting for about 60%, and the solubility COD is lower. However, the solubility of COD is more difficult to be biodegraded. Although there is no black liquor, there is still a high concentration of pollutants and poor biodegradability. Jining Tian Tong integrated wastewater treatment equipment R & D and production using the international advanced biological treatment technology, the technology of high removal efficiency, good decolorizing effect, has stable and reliable performance, good treatment effect, investment, less land occupation, convenient maintenance and so on, at the same time, our company can also according to customer requirements while supporting water reuse equipment.
    Two. Advantages of papermaking wastewater treatment equipment
    1. The integrated sewage treatment equipment is composed of carbon steel anticorrosion treatment or stainless steel components. Light weight, easy to transport, easy to install;
    2. The anticorrosion structure of FRP, carbon steel and stainless steel has excellent properties such as corrosion resistance, aging resistance and so on, and the service life is more than 30 years.
    3, placed under the surface of the surface, the surface of the equipment on the surface can be used as greening or other land, no building and heating, thermal insulation. The integration of the system is realized to the maximum limit, and the area is reduced.
    4, no pollution, no noise, no odor, reduce two pollution;
    5, unpolluted water limit, flexible maneuver, single use, and multiple joint use.
    6, the whole equipment processing system is equipped with automatic electrical control system and equipment failure alarm system. The operation is safe and reliable. Usually there is no need for personal management, just need to maintain and maintain the equipment timely, and the cost of management is small.
    7, the biggest feature is that the sewage treatment project can be arranged into landscape. Buried in the underground integrated equipment not only good effluent effect, and the surface greening rate is more than 90%, if the use of cold water loving special landmark tree or grass, the formation of landscape water treatment streams, fountains, ponds, pond together, foul for spring, both the management of the water pollution and beautify the environment, and meet people with in desire.
    Three. Basic installation, use and maintenance of papermaking sewage treatment equipment
    1, foundation: equipment if placed above the floor, only to prepare a concrete floor with the same equipment as the basis of the concrete floor. The base pressure must be greater than 4T/m2, and at the same time, it requires level and leveling. If the equipment is buried below the floor, the base elevation must be less than or equal to the equipment elevation and ensure that rain does not accumulate. The base is usually plain concrete (whether the reinforcement is based on the local geological conditions).
    2, installation: according to the installation map in place, the position and direction of the box can not be misplaced, and then connected to the inlet pipe. Before use, the water is injected into the equipment to check the leakage of each pipe, if no soil is covered around the box until the equipment is checked and the ground is leveled. The control line of the electronic control box is connected with the pump, the electric control box is connected with the power supply. When the connection is connected, the steering of the fan and the motor must be noticed. It must be the same as the direction of the fan.

    http://jnttjx01.cn.b2b168.com
    欢迎来到济宁市天通机械设备有限公司网站, 具体地址是山东省济宁任城区唐口工业园,老板是尹宜良。 主要经营济宁 天通,是国内成员之一的机械设备加工生产研发厂家,其核心技术以:智能自动化小型压路机、数控钢筋笼滚焊机、公路拌合机机械设备为主。 济宁 天通,始终坚持以“先做人,后做事”为核心价值观,以“儒商文化”为品牌文化,以“做今日品牌,创**企业”为宗旨,以“实用为本、德行天下”为理念,铸造中国机械行业的**品牌。公司依托与国外的分支机构、国内的办事处、及专业的施工队伍,凭借行业内设备研发*团队的强大创。 单位注册资金单位注册资金人民币 100 - 250 万元。 我司专营小型压路机,灰土拌和机,拖拽式小宝马拌和机,手扶压路机,钢筋笼滚焊机,研发团队成员,均来自国内外大型工程机械企业的研发机构的专业技术人员。经过多年的实践与积累,掌握了多种工程机械产品从设计到生产加工的全套技术。